▷ 18 sec video
Forces & motion
Wing lift demonstrator
Operate the front control and observe a curved wing inside a transparent airflow enclosure, with its supporting linkages visible.
Enhanced photograph · Real operating video
Forces & motion
Paper helicopter exhibit
Place a prepared paper piece inside a transparent wind tube and observe its movement during the guided airflow activity.
THE PRODUCT IN MOTION
See it work.
A portrait workshop clip looks into the transparent tube and across the front preparation tray. A paper piece is briefly visible near the base.
Video & text guideTHE ACTIVITY & MECHANISM
Watch a prepared paper piece in moving air
Air moving up the transparent tube exerts forces on a prepared paper piece. Its folded shape influences the motion, including any visible rotation or rise. The clear chamber allows visitors to follow that response while comparing the paper with the direction of the air stream.
- 01
Prepare the paper piece
Use the agreed paper pattern and the preparation tray.
- 02
Place and operate
Place the piece in the chamber and use the controls as instructed.
- 03
Observe and repeat
Watch the paper in the tube. Discuss a supervised activity around the final operating sequence.
REFERENCE & PROJECT SCOPE
Reference specifications.
Use the reference dimensions and operating information to plan the exhibit. The agreed project drawings define the supplied configuration, installation interfaces and service access.
- L × W × H
- 980 × 780 × 1,500 mm
- Exhibit theme
- Forces & motion
- Visitor activity
- Place. Observe. Try again.
- Power & supply
- Confirm whether this configuration requires power. Powered versions can be specified for 110/220 V AC and 50/60 Hz.
- Configuration options
- Appearance, interpretation language, controls and installation arrangement by project agreement
- Daily operating schedule
- 8 hours per day
- Scheduled maintenance
- Every 30 days
- Factory dispatch lead time
- 30–90 calendar days after design approval and receipt of the deposit. Transit time is additional.
- Minimum custom order
- One exhibit
Reference product dimensions in length × width × height order, including its base or cabinet where present. Allow additional installation and service clearances in the project layout.
Reference configuration notes
- Shown arrangement
- Transparent vertical tube on a cabinet station
- Visitor activity
- Paper preparation and observation in the airflow chamber
- Visible equipment
- Front tray, buttons and perforated tube base
Customisation, installation & support
- 01Paper activity
- Confirm the paper pattern, suitable stock, replenishment and the instructions supplied with the final exhibit.
- 02Students & supervision
- Discuss the age range, reach height, access to the chamber and whether activities are teacher-led.
- 03Installation & upkeep
- Review the full tube height, footprint, power, sound and access for cleaning and fan maintenance.
BEFORE AN ENQUIRY
Questions & support.
24 months of complimentary spare-parts support, remote technical guidance and long-term after-sales support. Exhibit Engineers pays the shipping cost of complimentary spare parts during the 24-month support period.
Explore the supportDelivery, installation & after-sales terms
- Payment
- A 50% deposit is payable after the contract is signed. The remaining balance is paid after acceptance and before dispatch, so full payment is received before dispatch. Payment methods are agreed in the contract.
- Packaging & transport
- Metal shipping cases or multilayer wood-panel shipping cases. Transport arrangements and costs are agreed to suit the project.
- Materials & painted finish
- Common material options include Q235 steel, stainless steel, aluminium alloy, PVC, acrylic, engineering plastics. The combination is selected for each configuration. Marine anti-corrosion paint with a piano-gloss automotive paint finish. Applied to painted parts.
- Typical power · powered versions
- Standard products: 100–500 W; oversized installations: 1,000–5,000 W. Typical ranges for powered versions. Confirm the selected model and final connected load.
- Product maintenance
- Agree cleaning, control checks and inspection of accessible parts for the supplied configuration.
- Installation & training
- Complimentary training is available on site or remotely, according to project needs. If installation or on-site after-sales service is not included in the product price, the customer pays the actual travel expenses incurred, unless the contract provides otherwise.
- Factory acceptance & handover
- Mid-production and pre-dispatch checks are provided. Factory acceptance can take place in person at the factory or through acceptance videos. Installation and operating videos, written installation and operating instructions, drawings and a spare-parts list are provided.
- Complimentary parts
- 24 months of complimentary spare-parts support, starting when the exhibit is handed over for use. Covers faults not caused by the user. User-caused or deliberate damage is excluded. Exhibit Engineers pays the shipping cost of complimentary spare parts during the 24-month support period.
- Warranty & repair labour
- The whole-exhibit warranty period and repair labour scope and charges are agreed in the contract.
Can we discuss a prototype or sample for a custom version?
Yes. Prototype testing and sample fabrication are available for custom projects. Discuss which functions or features you need to review for your version. The scope, cost and schedule are agreed for the project.
How prototype testing & samples workIs this a downloadable paper-helicopter lesson?
This page presents a physical exhibit station with a transparent airflow chamber. A printable activity or lesson would be separate teaching content.
Can a flight height or operating cycle be quoted from this clip?
The short recording is insufficient to establish those performance figures. Agree the paper pattern and operating sequence, then verify them against the project acceptance criteria.
What do the images and videos show?
The gallery labels photographs, video frames, renderings and the dimension drawing. Physical footage is identified separately.
CONTINUE EXPLORING
Related products.
▷ 18 sec video
Forces & motion
Flight simulator exhibit
Use a physical control yoke and levers to explore how control inputs change the aircraft view on an integrated screen.
Enhanced photograph · Real operating video
▷ 14 sec video
Forces & motion
Elastic airplane launcher exhibit
Load a model airplane onto an elastic launch ramp and observe its flight toward the separate ring target.
Enhanced photograph · Real operating video
▷ 3.4 sec video
Forces & motion
Rocket launch exhibit
Press the operating block and follow a small rocket as it moves along its vertical guide during the demonstration.
Enhanced photograph · Real operating video
FROM CONCEPT TO TURNKEY DELIVERY
Start with a reference. Shape your version.
Share the exhibit name, intended users and a plan or description of your setting. We can work through the experience and practical scope.