▷ 0:08 video
Forces & motion
Pneumatic ball launcher exhibit
A falling ball in one tube produces an air pulse that launches a smaller ball in a second tube.
Product photograph · Real operating video
Forces & motion
Uphill Rolling Double Cone
A double cone appears to roll uphill along widening rails.
THE PRODUCT IN MOTION
See it work.
A double cone appears to roll uphill along widening rails.
Video & text guideTHE ACTIVITY & MECHANISM
Compare the rail height with the cone’s centre of mass.
As the support points spread apart, the cone’s centre of mass can move downward even while the rails rise. The visible movement provides a comparison between rail height and centre-of-mass height.
- 01
Place the model at the indicated starting position
Place the double-cone model at the marked starting point with the rails clear.
- 02
Release it along the rails
Release it gently and observe its movement along the diverging rails.
- 03
Compare the rail slope and centre-of-mass motion
Compare the apparent upward rail direction with the falling centre of mass; the model does not move against conservation of energy.
REFERENCE & PROJECT SCOPE
Reference specifications.
The photographs and video show this project configuration. Overall dimensions are approximate planning references; confirm the final supplied version, installation interfaces and clearances.
- Approx. L × W × H
- 2,200 × 750 × 1,100 mm
- Exhibit theme
- Forces & motion
- Visitor activity
- Place the model at the indicated starting position · Release it along the rails · Compare the rail slope and centre-of-mass motion
- Reference operation
- Place the model at the indicated starting position. Release it along the rails. Compare the rail slope and centre-of-mass motion
- Power & supply
- For powered components, electrical supply can be configured for 110/220 V and 50/60 Hz. Confirm the connected load and interfaces for this configuration.
- Configuration options
- Appearance, interpretation language, controls and installation arrangement by project agreement
- Daily operating schedule
- 8 hours per day
- Scheduled maintenance
- Every 30 days
- Factory dispatch lead time
- 30–120 calendar days after design approval and receipt of the deposit. Transit time is additional.
- Minimum custom order
- One exhibit
Approximate overall dimensions for the illustrated configuration, including its base. Visitor circulation and service access are additional; confirm the final envelope in the approved project drawing.
Reference configuration notes
- Reference configuration
- Zichuan project reference
- Media shown
- Real product photographs and separately labelled project drawing or size planning note
Customisation, installation & support
- 01Configuration
- Use the photographed version and its controls as the starting point for the technical review.
- 02Installation
- Confirm overall dimensions, service access and the route into the gallery. Building supports and visitor circulation are additional.
- 03Operation
- Review the supplied operating instructions, visitor access and maintenance requirements.
BEFORE AN ENQUIRY
Questions & support.
24 months of complimentary spare-parts support, remote technical guidance and long-term after-sales support. Exhibit Engineers pays the shipping cost of complimentary spare parts during the 24-month support period.
Explore the supportDelivery, installation & after-sales terms
- Payment
- A 50% deposit is payable after the contract is signed. The remaining balance is paid after acceptance and before dispatch, so full payment is received before dispatch. Payment methods are agreed in the contract.
- Packaging & transport
- Metal shipping cases or multilayer wood-panel shipping cases. Transport arrangements and costs are agreed to suit the project.
- Materials & painted finish
- Common material options include Q235 steel, stainless steel, aluminium alloy, PVC, acrylic, engineering plastics. The combination is selected for each configuration. Marine anti-corrosion paint with a piano-gloss automotive paint finish. Applied to painted parts.
- Typical power · powered versions
- Standard products: 100–500 W; oversized installations: 1,000–5,000 W. Typical ranges for powered versions. Confirm the selected model and final connected load.
- Product maintenance
- Check visitor controls, fasteners, protective enclosures and moving clearances before operation. Follow the supplied product instructions and scheduled maintenance every 30 days.
- Installation & training
- Complimentary training is available on site or remotely, according to project needs. If installation or on-site after-sales service is not included in the product price, the customer pays the actual travel expenses incurred, unless the contract provides otherwise.
- Factory acceptance & handover
- Mid-production and pre-dispatch checks are provided. Factory acceptance can take place in person at the factory or through acceptance videos. Installation and operating videos, written installation and operating instructions, drawings and a spare-parts list are provided.
- Complimentary parts
- 24 months of complimentary spare-parts support, starting when the exhibit is handed over for use. Covers faults not caused by the user. User-caused or deliberate damage is excluded. Exhibit Engineers pays the shipping cost of complimentary spare parts during the 24-month support period.
- Warranty & repair labour
- The whole-exhibit warranty period and repair labour scope and charges are agreed in the contract.
Can we discuss a prototype or sample for a custom version?
Yes. Prototype testing and sample fabrication are available for custom projects. Discuss which functions or features you need to review for your version. The scope, cost and schedule are agreed for the project.
How prototype testing & samples workDoes the media show a physical installation?
Yes. The gallery and video use company-provided photographs and recordings. Project drawings are identified separately.
Can this configuration be adapted to our venue?
Share the intended audience, room plan and the aspects of this reference you want to retain. The final scope and technical interfaces are agreed for your project.
CONTINUE EXPLORING
Related products.
▷ 0:14 video
Forces & motion
Pulley lift chairs — gallery frame configuration
Three seated lifting stations let visitors compare the effort required by different pulley arrangements.
Product photograph · Real operating video
▷ 0:16 video
Forces & motion
Rotating Motion Comparison Bench
Three protected rotating demonstrations compare the response of a flexible band, liquid and moving bodies.
Product photograph · Real operating video
▷ 0:17 video
Forces & motion
Rotating Disc Motion Table
Place the supplied discs and rings on a rotating surface and compare their motion.
Product photograph · Real operating video
FROM CONCEPT TO TURNKEY DELIVERY
Start with a reference. Shape your version.
Share the exhibit name, intended users and a plan or description of your setting. We can work through the experience and practical scope.