▷ 0:49 video
Fundamental science
Pulley lift chairs — freestanding configuration
Pull a rope to raise a seated platform and compare the different pulley arrangements.
Product photograph · Real operating video
Fundamental science
Jacob’s ladder discharge exhibit
Observe an electrical discharge rise between diverging conductors inside a protective enclosure.
THE PRODUCT IN MOTION
See it work.
The discharge heats the surrounding gas. Buoyant hot gas helps carry the conducting path upward until it breaks and restarts near the lower gap.
Video & text guideTHE ACTIVITY & MECHANISM
Watch an electric arc climb and restart.
Start the enclosed discharge demonstration and follow the arc from the lower electrode gap upwards. The arc heats the gas around it; the rising hot gas helps carry the conducting path upward. When the gap becomes too wide to sustain it, the arc breaks and a new one forms near the narrower lower gap.
- 01
Start the enclosed demonstration
Start the demonstration using the visitor control and remain outside its enclosure.
- 02
Watch the arc rise
Follow the arc as it rises between the electrodes.
- 03
Observe the repeating cycle
Observe where it disappears and where the next arc begins.
REFERENCE & PROJECT SCOPE
Reference specifications.
The photographs show a project configuration. Confirm the complete installation envelope, interfaces and operating instructions for the version to be supplied.
- Approx. L × W × H
- 800 × 800 × 1,400 mm
- Exhibit theme
- Fundamental science
- Visitor activity
- Start the enclosed demonstration · Watch the arc rise · Observe the repeating cycle
- Reference operation
- Start the demonstration using the visitor control and remain outside its enclosure. Follow the arc as it rises between the electrodes. Observe where it disappears and where the next arc begins.
- Power & supply
- Electrical supply can be configured for 110/220 V and 50/60 Hz where the selected mechanism requires power. Confirm the connected load and interfaces for this version.
- Configuration options
- Appearance, interpretation language, controls and installation arrangement by project agreement
- Daily operating schedule
- 8 hours per day
- Scheduled maintenance
- Every 30 days
- Factory dispatch lead time
- 30–120 calendar days after design approval and receipt of the deposit. Transit time is additional.
- Minimum custom order
- One exhibit
Project drawing reference for the circular cabinet and upper protective enclosure, including the base. Values are approximate project-planning references until the final supplied configuration is agreed.
Reference configuration notes
- Reference configuration
- Georgia project reference
- Media shown
- Real product photographs and separately labelled project drawing or size planning note
- Project drawing L × W × H
- 800 × 800 × 1400 mm · circular table Ø800 including upper enclosure.
- Drawing status
- Project reference, not an as-built measurement. Confirm the photographed configuration before specifying.
Customisation, installation & support
- 01Configuration
- Use the photographed version and its controls as the starting point for the technical review.
- 02Installation
- Confirm overall dimensions, service access and the route into the gallery. Building supports and visitor circulation are additional.
- 03Operation
- Review the supplied operating instructions, visitor access and maintenance requirements.
BEFORE AN ENQUIRY
Questions & support.
24 months of complimentary spare-parts support, remote technical guidance and long-term after-sales support. Exhibit Engineers pays the shipping cost of complimentary spare parts during the 24-month support period.
Explore the supportDelivery, installation & after-sales terms
- Payment
- A 50% deposit is payable after the contract is signed. The remaining balance is paid after acceptance and before dispatch, so full payment is received before dispatch. Payment methods are agreed in the contract.
- Packaging & transport
- Metal shipping cases or multilayer wood-panel shipping cases. Transport arrangements and costs are agreed to suit the project.
- Materials & painted finish
- Common material options include Q235 steel, stainless steel, aluminium alloy, PVC, acrylic, engineering plastics. The combination is selected for each configuration. Marine anti-corrosion paint with a piano-gloss automotive paint finish. Applied to painted parts.
- Typical power · powered versions
- Standard products: 100–500 W; oversized installations: 1,000–5,000 W. Typical ranges for powered versions. Confirm the selected model and final connected load.
- Product maintenance
- Use the supplied-version inspection and cleaning instructions. Check controls, fasteners and protective enclosures before operation; scheduled maintenance is every 30 days.
- Installation & training
- Complimentary training is available on site or remotely, according to project needs. If installation or on-site after-sales service is not included in the product price, the customer pays the actual travel expenses incurred, unless the contract provides otherwise.
- Factory acceptance & handover
- Mid-production and pre-dispatch checks are provided. Factory acceptance can take place in person at the factory or through acceptance videos. Installation and operating videos, written installation and operating instructions, drawings and a spare-parts list are provided.
- Complimentary parts
- 24 months of complimentary spare-parts support, starting when the exhibit is handed over for use. Covers faults not caused by the user. User-caused or deliberate damage is excluded. Exhibit Engineers pays the shipping cost of complimentary spare parts during the 24-month support period.
- Warranty & repair labour
- The whole-exhibit warranty period and repair labour scope and charges are agreed in the contract.
Can we discuss a prototype or sample for a custom version?
Yes. Prototype testing and sample fabrication are available for custom projects. Discuss which functions or features you need to review for your version. The scope, cost and schedule are agreed for the project.
How prototype testing & samples workDoes the media show a physical installation?
Yes. The gallery and video use company-provided photographs and recordings. Project drawings are identified separately.
Can this configuration be adapted to our venue?
Share the intended audience, room plan and the aspects of this reference you want to retain. The final scope and technical interfaces are agreed for your project.
CONTINUE EXPLORING
Related products.
▷ 1:58 video
Fundamental science
Air resistance and free fall tubes
Two tall transparent tubes compare falling objects under different air conditions.
Product photograph · Real operating video
▷ 0:17 video
Fundamental science
Interactive plasma tube exhibit
An illuminated gas-discharge tube responds when a hand approaches or touches its outer surface as directed.
Product photograph · Real operating video
▷ 1:21 video
Fundamental science
Musical Tesla coil installation
An enclosed Tesla-coil installation combines a visible electrical discharge with a programmed sound sequence.
Product photograph · Real operating video
FROM CONCEPT TO TURNKEY DELIVERY
Start with a reference. Shape your version.
Share the exhibit name, intended users and a plan or description of your setting. We can work through the experience and practical scope.